support.gif (10214 bytes)		 phrase.gif (2121 bytes)
.

buttons.gif (2853 bytes)
cap2.gif (1062 bytes)              Installing the InterActive Kit for Windows95
.
  btt1.gif (1879 bytes)

  btt2.gif (1727 bytes)

  btt3.gif (1579 bytes)

  btt4.gif (1767 bytes)

  btt5.gif (1872 bytes)

spacer.gif (856 bytes)
Installing the InterActive Kit for Windows95

 

To Install the InterActive Kit for Windows
and use the Internet Setup Wizard.

  1. Double-click on My Computer and then double-click on 3 1/2 Floppy.
  2. Double-click on the Install Icon.
  3. After the main install routine runs the installation will start the Microsoft Explorer installation.
  4. If you already have Explorer installed skip ahead to step 9 and run the Internet Setup Wizard.
    Do Not Install this version of Explorer if you already have Explorer version 3.
  5. At the first screen click I Agree. Select a location for the installation of Explorer. Typically you would
    double-click on (C:) and then click OK.
  6. When finished you will be prompted to restart your system. Click OK and the reboot your computer by
    clicking Start, Shutdown, Restart the computer ( do not just turn off power when using Windows 95).
    Be sure to remove the diskette in the floppy drive before rebooting. If at any time you get a warning regarding
    that DHCP can’t be found, click on Don’t show this message again and continue.
  7. When the computer restarts double-click on the new icon on the desktop named The Internet.
  8. At this point the Internet Setup Wizard should be started.
  9. Should you wish to run the Internet Setup Wizard in the future it can be found under Start,
    Programs, Accessories, Internet Tools.
  10. Click Next.
  11. Select I already have an account with a different service provider and click next.
  12. If you want to use Microsoft Exchange to send and receive EMAIL click yes (recommended) and then next.
  13. Click next. (You may need you Windows 95 CD or disks).
  14. Select your modem and click next.
  15. Enter INS for the name of your Internet Service Provider and click next.
  16. Enter the phone number that services your area (227-0388 for Blackwood, 298-9277 for Bordentown, 768-7509 for Berlin,
    456-1136 for Gloucester, 461-6667 for Delran, 267-7847 for Lumberton). Make sure that Bring up terminal window after dialing
    is not checked. Click next.
  17. Enter your username (all lowercase) and your password (with the appropriate capital letter(s)).
  18. Select My Internet Service Provider automatically assigns one.
  19. For DNS Server enter 205.137.56.10 and for alternate server enter 205.137.56.12 . Click next.
  20. Make sure Use Internet Mail is selected. Enter your email address in the for of your login name@jersey.net.
    Example: me@jersey.net
  21. For Internet mail server enter mail.jersey.net and click next.
  22. Click next.
  23. Click Finish.
  24. Click yes to restart your computer.
  25. If you are Dialing into one of these phone numbers (267-7847,298-9277) proceed to
    Automating your Login with a Dial-Up Script    . Otherwise Stop here!

Automating your Login with a Dial-Up Script
(You must complete the following section for your Internet account to operate
properly if the phone number you are dialing is: 267-7847,298-9277)

  1. Click the START button, select Programs, InterActive Kit, Scripter. The dial-up scripting tool will be installed.
  2. Click the START button, select Programs, Accessories, Dial-Up Scripter Tool.
  3. The current dial-up profile(s) will be listed in the text area on the left including INS. Select the INS then press the
    Browse button. The script INS.SCP should be visible, (it may appear as Ins) If it is not, navigate to /Program
    Files/Accessories    . Select INS.SCP and click Open.
  4. Click the Apply button.
  5. Double click My Computer, then Control Panel.
  6. Double-click on Internet.
  7. Click on the Connection Tab.
  8. Make sure that Use AutoDial is checked.
  9. In the selector box under Choose the Dial-Up Networking Connection select INS. Click OK to close this dialog box.
  10. If this is a brand new installation you do not need to do the following section, . If you are upgrading from a system that
    brings up a post dial-up terminal screen (black screen that prompts you for ppp, login name, etc) then you will need to
    do the following. Although if this is a brand new installation, proceed to Connecting To InterActive Network Systems.

To disable manual log in:

  1. Double-click the My Computer Icon.
  2. Double-click the Dial-Up Networking Icon.
  3. Single-click the INS icon with the RIGHT mouse button and select Properties.
  4. Select Configure.
  5. Select Options.
  6. Remove the check mark from Bring up terminal window after dialing. Click OK.
  7. Proceed to Connecting To InterActive Network Systems.

Connecting to InterActive Network Systems (AUTOMATED LOGIN)

  1. Double click Internet icon on the desktop.
  2. Enter your login name as User Name.
  3. Enter your password. You may wish to check the save password box.
  4. If this box is grayed out, go to the network icon in the control panel and select Add, select Client, select Microsoft
    and choose Client for Microsoft Networks. You will be prompted to restart the machine.
  5. Click on connect.

Back to Top

Downloading Netscape For Windows 95
If you have Microsoft Explorer you can download Netscape by going to
http://www.jersey.net and clicking on the Netscape icon.

  • Create a DOS window by selecting Start, Programs, MSDOS Prompt.
    Create a temporary directory and change to it as shown below.

mkdir c:\temp

cd c:\temp

  • Invoke an ftp session by typing:

ftp ftp3.netscape.com

Note: Upon occasion ftp3 may be extremely busy. Substitute another server name such as ftp13 in that circumstance.

  • Log in as anonymous.. Note that you will not see the password while you are typing it,

User (ftp3.netscape.com:(none)): anonymous

Password: yourname@jersey.net (Replace "yourname" with your actual login name)

  • Change to binary mode:

ftp> binary

  • Change to the newest Netscape directory. The directory should have the name of the newest version, in the example
    below the newest version is 3.01.

ftp> cd /pub/navigator/3.01/windows

  • Retrieve the 32-bit version of Netscape. Note that this filename changes from time to time.

ftp> get n32e301.exe

  • The download will require between 20 to 60 minutes depending on your modem speed. When the download
    is completed the ftp> prompt will return. To exit type quit.
  • Exit DOS. To run the Netscape install command, bring up the c\/temp directory with My Computer or Explorer
    or do a Find, File or Folders, n32e30.exe . Double-click on the filename(n32e301.exe) and the install
    procedure will start.

Back to Top

To set up Various Programs

Netscape versions 2.0, 3.0, and 3.01

  1. Click on Options, Mail and News Preferences, Servers.
  2. For both outgoing and incoming mail servers (SMTP and POP) enter mail.jersey.net .
  3. For Pop User Name enter your login name. This should be just the lowercase login name without any extra characters,
    I.E. do not use @jersey.net.
  4. For News Server enter news.jersey.net .
  5. Click on Identity.
  6. For Your Name enter your real name or the name you would like to appear on the From line of your mail.
  7. Under Your Email, enter your login name including @jersey.net on the end. An example would be me@jersey.net .
  8. To read mail click on Window, Netscape Mail. To read mail click on File, Getmail or click on the Getmail icon.
  9. To send mail click on To.

Back to Top

 

Eudora

  1. Click on Special, Configuration.
  2. Under POP Account enter your login name followed by @jersey.net. An example would be me@jersey.net .
  3. For Real Name enter your real name or the name you would like to appear on the From line of your mail.
  4. For SMTP Server enter mail.jersey.net.
  5. To receive mail click on File, Checkmail. To send mail, click on Message, Send Message. Compose your message and click on Send.

Back to Top

 

IRC Chat

  1. Open the IRC program that came with your InterActive Kit by clicking on Start, Program, InterActive Kit, IRC.
  2. Click on File, Setup. Select an IRC host. Your kit should default to irc.cris.com.
  3. For Real Name enter a false identity unless you don’t mind if other individuals on the Internet know your real name.
  4. For email enter a fake email address unless you don’t mind if other individuals on the Internet know your email address.
  5. Pick a Nickname and an Alternate Nickname. Again these should preserve your anonymity. If someone else is using the nickname
    you have chosen either the alternate nickname will be used or you will be told that your name is already in use.
  6. Click Connect if still in the Setup menu or click on the lightning bolt icon when at the main screen.
  7. After successful connection to an IRC chat server there will be a window with the name of the server somewhere in the top title
    bar. At the bottom of that window is a single row where you can type in commands. Type in /list into the bottom line.
  8. Downloading the list of chat rooms may take several minutes. When completed, scroll down the list to the chat room you would like
    to join. Double-click on the name of the chat room. A new window will appear representing the chat room. When you type, others
    in the room will see what you are typing.

Back to Top

 

News

  1. Open the News program that came with your InterActive Kit by clicking on Start, Program, InterActive Kit, News.
  2. The first time you open News you will be presented with a setup window Communication Options. Replace NewsServerName
    with news.jersey.net . For MailServerName put mail.jersey.net . Do not enter a user name and password or you will not be
    able to connect to the news server. Click OK.
  3. At the next window Personal Information enter your actual name for Your Name. Enter your email address at the next line in the
    form username@jersey.net .Leave the Reply-to and Organization name blank.
  4. Click on Network, Connect to server. The program will respond with Request LIST from Server. Click yes.
  5. When the program is done downloading the list of news groups, click on the name of the newsgroup you wish to subscribe to. Click OK.
  6. Clicking on displayed newsgroups will show the contents of that newsgroup.

Back to Top

 

Our new Digital Service has been installed and offers speeds up to 33.6 bps,
56.6bps (The K-Flex Standard when available) and ISDN.
This is the first of many services that are going in.

 

Windows95:

  • If you have Automated Log In:
  1. Click on the Start Button, Programs, Accessories, and Dial-up Scripting Tool
  2. On the Left Highlight the name of your connection (typically INS)
  3. On the Right under Script delete the text (It should look something like this C:\Program Files\Accessories\Ins.scp)
  4. Press Apply, then Close Button

Now when you log in the system will extract your login name and password from the "Connect To" box. Make sure they are correct.

  • To manually log in:

There is Nothing to do. But you’ll notice that the prompts are Different!!

  • Changing the phone number:
  1. Double click on My Computer and then Dial-up Networking
  2. Right click on your connection (typically INS)
  3. Click on Properties
  4. Change the phone number to 456-1136 or 768-7509 or 227-0388
  5. Press the OK Button

Back to Top

 

Windows 3.1

  1. Click here to download the Windows 3.1 patch.exe.
  2. If your browser asks you what to do with the file, click save file.
  3. Then where to save the patch to. We suggest saving it to directory like c:\temp or c:\ .
  4. Disconnect your internet connection and make sure that the program
    TCPMAN is not running. We recommend restarting Windows to be sure.
  5. Execute the file by going to Program Manager and clicking on Run, Browse,
    and select the file name depending on where you choose to save it in step 2.
  6. As the patch runs it will search for and replace files. It will pause and prompt you
    for whether you wish to replace the files. We suggest pressing the YES key.
  7. To change phone numbers, go to the Internet! group and click on Configure.
    Select the phone number you desire and proceed as you did when first installing the kit.

Back to Top

 

Mac

  • Disabling the Script in Config PPP
  1. Go to Control Panel and Select Config PPP
  2. Click On Config
  3. Change the Phone Number to 456-1136 or 768-7509 or 227-0388
  4. Click on Authentication And Fill out Login and Password
  5. Click OK
  6. Click Connect Script
  7. Delete All Values and <CR>’s ( All Should Read OUT)
  8. Click OK
  9. Click Done
  10. Click Open to Connect to INS
  • For People who are running FREE PPP
  1. Click Free PPP setup
  2. Click on the Accounts Tab
  3. Click on Edit
  4. Change the Phone Number to 456-1136 or 768-7509 or 227-0388
  5. Find Connect: And Change to Directly
  6. Check to make sure User Name and Password are Correct
  7. Click OK
  8. Click Connect to connect to INS

Back to Top

Copyright 2004 InterActive Network Systems, Inc